• Skip to main content

SSM Performance Parts

  • Home
  • Select car
    • BRZ/86
    • Evo 4-9
    • Evo 10/Ralliart
    • GR Yaris/Corolla
    • WRX/STI
  • universal
    • Car Batteries
    • Flex Fuel Kits
    • Fluids
    • Fuel Pressure Regulators
    • Gauges, Sensors, Pods & Accessories
    • Miscellaneous
    • Oil Pressure Regulators
    • Wastegates
    • Wheel Accessories
  • Retrimming
  • About Us
  • Contact Us
  •  
Zeitronix ZT3 CANBUS Wideband with ZR3 Gauge

Zeitronix ZT3 CANBUS Wideband with ZR3 Gauge

$480.00 inc. GST

Clear
SKU: SSM2244 Categories: Gauges, Sensors, Pods and Accessories, Zeitronix
  • Description
  • Additional information

Description

The Zeitronix Wideband Air/Fuel ratio meter and datalogging system is a high quality, stand-alone system for use with carbureted and electronic fuel injection engines. The Zt-3 CAN supports CAN Bus communication for easy connection and logging through other CAN Bus devices supporting a wide range of CAN Bus settings.

The new Zt-3 has the same high quality, high precision air fuel ratio readings as our signature Zt-2 wideband. The Zt-3 supports wideband air fuel ratio and lambda readings, adjustable simulated narrowband output and a new configurable linear wideband output for ease of use with engine management systems and 3rd party gauges.

No matter if you have a stand alone engine management system, a piggy back fuel control or a carbureted engine. The Zt-3 Wideband Air Fuel Ratio Meter is a must for serious tuners! Finally you can tune for more power, closer to the edge, precisely monitoring Air/Fuel ratio and datalogging up to 9 hours of data with a blazing rate of 65 samples per second per graph. The Zeitronix Data Logger Software can be utilized as a real time display when using a standard Zt-3 kit with or without the ZR-1 or DashDAQ displays.

The new Zt-3’s dimensions are only 3 by 2 by 1 inches.  The case includes slots case for easy zip tie mounting in a tucked away location.

Features:

  • 0.1 AFR accuracy
  • Operating voltage 10V to 18V
  • Switching power supply for oxygen sensor heater
  • Precise sensor temperature control
  • Reverse polarity protection
  • Integrated self resettable fuse
  • Positive lock connectors
  • Protected inputs and outputs
  • Flexible Plug and Play Sensor Harness with a small, easy to route through the fire wall, connector
  • Kits available with or without the wideband oxygen sensor included
  • Easy to install plug and play kit
  • Narrowband Output
  • Configurable Wideband Analog Output

Inputs/Outputs:

  • Bosch Wideband O2 sensor Input
  • Simulated Narrowband Output
  •  Linear Wideband Output (configurable with a default setup of AFR = Volts * 2 + 9.6
  • Serial data output to the Zeitronix ZR-1 AFR, DashDAQ and nGauge displays
  • Serial data output for real time datalogging (PC laptop required)
  • CAN Bus High and Low

Kit Includes:

  • Zt-3 CAN Wideband Controller
  • Bosch 5 wire Wideband Oxygen Sensor
  • Oxygen Sensor Harness (10 feet length)
  • Signal Harness
  • Serial datalogging cable with RJ-12 to DB-9 converting plug
  • Instructions

Supported CAN Bus Specifications:

  • User selectable CAN Bus Speed: 1Mbps, 500 Kbps, 250 Kbps, 125 Kbps
  • User selectable CAN Bus ID:  Standard (11 bit) and Extended (29 bit)
  • User selectable CAN Bus address: Standard 0x0000 to 0x7FF / Extended 0x0000 to 0x7FFF
  • User selectable CAN Bus update rate:  1ms (1000Hz) to 250ms (4 Hz)
  • 120 ohm termination: None

CAN Data:

  • Data 0, 1 : Lambda 16 bit (Big Endian, Motorola) x 0.001
  • Data 2 : Lambda 8 bit x 0.01
  • Data 3 : AFR 8 bit x0.1
  • Data 7: Lambda sensor status
  • 0x00 Sensor OK
  • 0x01 Sensor cold (warm up)
  • 0x02 Sensor too hot
  • 0x04 Sensor heater circuit open
  • 0x08 Sensor heater circuit shorted
  • 0x10 Sensor maxed at rich lambda

ZR-3 Gauge:

The ZR-3 AFR Gauge works with all Zt-2 and Zt-3 Wideband Systems. The ZR-3 Gauge plugs into the Zt-3/Zt-2 DATA port. Power and serial data is supplied directly through the single connection – there are no additional +12V or ground wires. The ZR-3 cable length is 5 ft (1.5m).

Additional information

Select Colour

Red, Blue

Related products

  • Sale! AEM Replacement O2 Sensor (LSU 4.9)

    AEM Replacement O2 Sensor (LSU 4.9)

    $200.00 Original price was: $200.00.$180.00Current price is: $180.00. inc. GST
    Add to cart
  • AEM Digital Volts Gauge

    AEM Digital Volts Gauge

    $215.00 inc. GST
    Add to cart
  • Innovate Replacement O2 Sensor (LSU 4.2)

    Innovate Replacement O2 Sensor (LSU 4.2)

    $135.00 inc. GST
    Add to cart
  • Innovate MTX-D Boost and Shift Light Kit

    Innovate MTX-D Boost and Shift Light Kit

    $330.00 inc. GST
    Add to cart
  • Facebook
  • Instagram
  • zip – Own it now, pay later

Copyright © 2025 — SSM Performance Parts

All rights reserved.

Disclaimer

Designed by ZenByte

Log in